Octathingy_mount: remove old version of the body

Octathingy_mount_pcb.scad

@@ -135,6 +135,8 @@ module one_pcb_parts (height, pcb_w, pcb_l, pcb_t, pcb_offset, slot_d, front, ba
     }
 }
 
+// octagonal body
+
 module rounded_octagon(height, radius) {
     intersection() {
         cylinder(r = radius, h = height, $fn = 8);
@@ -150,69 +152,10 @@ module rounded_octagon_wall(height, radius, wall) {
 }
 
 // twist angle to optimize space usage inside body
-//octa_pcb_twist = pcb_version == 2 ? 12 : 16;
 octa_pcb_twist = pcb_version == 2 ? 13.5 : 16;
 // tilt angle to clear upper flare thread
 octa_pcb_tilt = pcb_version == 2 ? -0.7 : 0.0;
 
-module octa_mount_body_old(height, radius, lower_lip, upper_lip, clear) {
-    // rotate pcb assembly so it does not interfere with the screws
-    offset_angle = -octa_pcb_twist;
-    // rotate individual pcb's to better use the internal space of the body
-    twist_angle = octa_pcb_twist;
-    difference() {
-        union() {
-            difference() {
-                union() {
-                    // main body
-                    rounded_octagon_wall(height, radius, 2 * wall);
-                    // slots for printed circuit boards
-                    intersection() {
-                        for (r = [0:360/8:360]) rotate([0, octa_pcb_tilt, r + offset_angle]) {
-                            translate([radial_pcb_offset, 0, 0]) {
-                                rotate([0, 0, 180 + twist_angle]) {
-                                    one_pcb_slot(height * 2/3, pcb_width + pcb_fit, pcb_length, pcb_thickness + pcb_tfit, -10,
-                                        pcb_slot_depth, pcb_front, pcb_back, false);
-                                }
-                            }
-                        }
-                        // clip outside
-                        rounded_octagon(height, radius);
-                    }
-                }
-                // upper lip for flare to microphone
-                translate([0, 0, height - upper_lip]) {
-                    rounded_octagon_wall(upper_lip, radius, wall + lip_fit);
-                }
-                // lower lip for flare to cable or connector
-                translate([0, 0, 0]) {
-                    rounded_octagon_wall(upper_lip, radius, wall + lip_fit);
-                }
-            }
-            // add backplates for upper lip screws
-            for (r = [45, 135, 225, 315]) {
-                rotate([0, 0, r]) translate([-(radius - 3 * wall), -2.5, 0]) {
-                    cube([2, 5, height]);
-                }
-            }
-        }
-        // make eight holes in the the body for screws that hold both flares
-        // (number 0 size, 1/4" long = thread diameter: 1.6mm, head diameter: 2.75)
-        difference() {
-            for (z = [lower_lip/2, height - upper_lip/2]) {
-                for (r = [45, 135, 225, 315]) {
-                    rotate([0, 0, r]) translate([-(radius + 2 * wall), 0, z]) {
-                        rotate([0, 90, 0]) {
-                            cylinder(r = 0.7, h = radius + wall, $fn = facets);
-                        }
-                    }
-                }
-            }
-            cylinder(r = radius/2, h = height);
-        }
-    }
-}
-
 module octa_mount_body(height, radius, lower_lip, upper_lip, clear) {
     // rotate pcb assembly so it does not interfere with the screws
     offset_angle = -octa_pcb_twist;