Octathingy_mount: remove old version of flare with integrated stalk (this is now split into two parts, flare and stalk)

Octathingy_mount_pcb.scad

@@ -235,219 +235,6 @@ module octa_mount_body(height, radius, lower_lip, upper_lip, clear) {
     }
 }
 
-// flare from the body to the microphone stalk
-
-module octa_mount_flare_no_ws(height, lip, transition, radius, top_radius, stalk_height, dot) {
-    // bottom box
-    difference() {
-        union() {
-            rounded_octagon_wall(height, radius, 2 * wall);
-            // small pedestals for the screws that attach the flare to the body
-            // (number 0 size, 1/4" long = thread diameter: 1.6mm, head diameter: 2.75)
-            for (r = [45, 135, 225, 315]) rotate([0, 0, r]) {
-                translate([radius - wall - 1.75, 0, lip/2]) {
-                    rotate([0, 90, 0]) {
-                        cylinder(r = 1.5, h = 2 * wall, $fn = facets);
-                    }
-                }
-            }
-        }
-        // flange to mount on body
-        rounded_octagon_wall(lip + 1.00, radius - wall, wall);
-        // and make a smooth transition to avoid overhangs
-        translate([0, 0, lip + 1.00]) {
-            hull() {
-                rounded_octagon_wall(thin_mint, radius - wall, wall);
-                translate([0, 0, 1.0]) {
-                    rounded_octagon_wall(thin_mint, radius - 2 * wall, wall);
-                }
-            }
-        }
-        // holes for screws that attach the flare to the body
-        // Number 0 Size, 1/4" Long = thread diameter: 1.6mm, head diameter: 2.75
-        for (r = [45, 135, 225, 315]) rotate([0, 0, r]) {
-            translate([radius/2, 0, lip/2]) {
-                rotate([0, 90, 0]) {
-                    cylinder(r = (1.6 + 0.1)/2, h = radius, $fn = facets);
-                }
-            }
-        }
-    }
-    // flare to round section
-    translate([0, 0, height]) {
-        difference() {
-            hull() {
-                rounded_octagon(thin_mint, radius);
-                translate([0, 0, transition]) {
-                    cylinder(r = top_radius, h = thin_mint, $fn = facets);
-                }
-            }
-            hull() {
-                rounded_octagon(thin_mint, radius - wall);
-                translate([0, 0, transition]) {
-                    cylinder(r = top_radius - wall, h = thin_mint, $fn = facets);
-                }
-            }
-        }
-    }
-    // cylindrical stalk
-    translate([0, 0, height + transition]) {
-        difference() {
-            cylinder(r = top_radius, h = stalk_height, $fn = facets);
-            cylinder(r = top_radius - wall, h = stalk_height, $fn = facets);
-        }
-        // add marker for "back of microphone" orientation
-        if (dot == 1) {
-            rotate([0, 0, 90]) {
-                translate([0, top_radius - wall * 2 / 3, stalk_height - top_radius]) {
-                    difference() {
-                        sphere(r = top_radius / 3, $fn = 32);
-                        translate([0, -top_radius + top_radius / 2, 0]) {
-                            cube([top_radius, top_radius, top_radius], center = true);
-                        }
-                    }
-                }
-            }
-        }
-        // close stalk and add holes for cables
-        translate([0, 0, stalk_height - top_radius - wall]) {
-            difference() {
-                cylinder(r = top_radius - wall, h = top_radius + wall, $fn = facets);
-                translate([0, 0, 0]) {
-                    sphere(r = top_radius - wall, $fn = facets);
-                }
-                wire_diam = mic_wire_diam + mic_wire_fit;
-                for (r = [0, 90, 180, 270]) rotate([0, 0, r]) {
-                    for (t = [0, 1]) {
-                        rotate([0, 0, 45 * t]) translate([top_radius - wire_diam - t * wire_diam * 2/3, 0, wall]) {
-                            cylinder(r = wire_diam / 2, h = top_radius * 2, $fn = facets);
-                        }
-                    }
-                }
-                translate([0, 0, wall]) cylinder(r = wire_diam, h = top_radius * 2, $fn = facets);
-            }
-        }
-    }
-}
-
-module octa_mount_flare_old(height, lip, transition, radius, top_radius, stalk_height, dot) {
-    // transition from bottom box to windscreen mounting thread
-    transition_to_threads = 5;
-    // bottom box
-    difference() {
-        union() {
-            rounded_octagon_wall(height, radius, 2 * wall);
-            // small pedestals for the screws that attach the flare to the body
-            // (number 0 size, 1/4" long = thread diameter: 1.6mm, head diameter: 2.75)
-            for (r = [45, 135, 225, 315]) rotate([0, 0, r]) {
-                translate([radius - wall - 1.75, 0, lip/2]) {
-                    rotate([0, 90, 0]) {
-                        cylinder(r = 1.5, h = 2 * wall, $fn = facets);
-                    }
-                }
-            }
-            // indicator of "front" of microphone
-            rotate([0, 0, 180 + 22.5]) translate([radius - 2, 0, 0]) {
-                cylinder(r = 1.0, h = lip/2, $fn = facets);
-            }
-            // stops for shock mount
-            for (r = [0, 90, 180, 270]) rotate([0, 0, r - 22.5]) {
-                translate([radius - 3.4, 0, 0]) scale([2.0, 1.0, 1.0]) {
-                    difference() {
-                        cylinder(r = 2.0, h = lip + transition_to_threads, $fn = facets);
-                        translate([-2, -2.0, 0]) cube([2.0, 4.0, lip + transition_to_threads]);
-                    }
-                }
-            }
-        }
-        // flange to mount on body
-        rounded_octagon_wall(lip + 1.00, radius - wall, wall);
-        // and make a smooth transition to avoid overhangs
-        translate([0, 0, lip + 1.00]) {
-            hull() {
-                rounded_octagon_wall(thin_mint, radius - wall, wall);
-                translate([0, 0, 1.0]) {
-                    rounded_octagon_wall(thin_mint, radius - 2 * wall, wall);
-                }
-            }
-        }
-        // holes for screws that attach the flare to the body
-        // Number 0 Size, 1/4" Long = thread diameter: 1.6mm, head diameter: 2.75
-        for (r = [45, 135, 225, 315]) rotate([0, 0, r]) {
-            translate([radius/2, 0, lip/2]) {
-                rotate([0, 90, 0]) {
-                    cylinder(r = (1.6 + 0.1)/2, h = radius, $fn = facets);
-                }
-            }
-        }
-    }
-    // flare to windscreen threads
-    translate([0, 0, height - windscreen_thread_height - transition_to_threads]) {
-        difference() {
-            hull() {
-                rounded_octagon(thin_mint, radius);
-                translate([0, 0, transition_to_threads]) {
-                    cylinder(r = windscreen_thread_radius + 0.5, h = thin_mint, $fn = facets);
-                }
-            }
-            hull() {
-                rounded_octagon(thin_mint, radius - wall);
-                translate([0, 0, transition_to_threads]) {
-                    cylinder(r = windscreen_thread_radius - windscreen_thread_depth - wall, h = thin_mint, $fn = facets);
-                }
-            }
-        }
-    }
-    // windscreen mounting threads
-    translate([0, 0, height - windscreen_thread_height]) difference() {
-        metric_thread(diameter = windscreen_thread_radius * 2, pitch = windscreen_thread_pitch,
-            length = windscreen_thread_height, angle = windscreen_thread_angle, internal = false);
-        cylinder(r = windscreen_thread_radius - wall - windscreen_thread_depth, h = windscreen_thread_height + thin_mint, $fn = facets);
-    }
-    // flare to stalk
-    translate([0, 0, height - 1.5]) {
-        difference() {
-            hull() {
-                cylinder(r = windscreen_thread_radius - windscreen_thread_depth, h = thin_mint, $fn = facets);
-                translate([0, 0, transition + 1.5]) {
-                    cylinder(r = top_radius, h = thin_mint, $fn = facets);
-                }
-            }
-            hull() {
-                cylinder(r = windscreen_thread_radius - windscreen_thread_depth - wall, h = thin_mint, $fn = facets);
-                translate([0, 0, transition + 1.5]) {
-                    cylinder(r = top_radius - wall, h = thin_mint, $fn = facets);
-                }
-            }
-        }
-    }
-    // cylindrical stalk
-    translate([0, 0, height + transition]) {
-        difference() {
-            cylinder(r = top_radius, h = stalk_height, $fn = facets);
-            cylinder(r = top_radius - wall, h = stalk_height, $fn = facets);
-        }
-        // close stalk and add holes for cables
-        translate([0, 0, stalk_height - top_radius - wall]) {
-            difference() {
-                cylinder(r = top_radius - wall, h = top_radius + wall, $fn = facets);
-                translate([0, 0, 0]) {
-                    sphere(r = top_radius - wall, $fn = facets);
-                }
-                wire_diam = mic_wire_diam + mic_wire_fit;
-                for (r = [0, 90, 180, 270]) rotate([0, 0, r]) {
-                    for (t = [0, 1]) {
-                        rotate([0, 0, 45 * t]) translate([top_radius - wire_diam - t * wire_diam * 2/3, 0, wall]) {
-                            cylinder(r = wire_diam / 2, h = top_radius * 2, $fn = facets);
-                        }
-                    }
-                }
-                translate([0, 0, wall]) cylinder(r = wire_diam, h = top_radius * 2, $fn = facets);
-            }
-        }
-    }
-}
-
 // stalk from flare to capsule array mount
 
 module octa_mount_stalk(height, lip, transition, radius, top_radius, stalk_height, dot) {