 Fernando Pablo Lopez-Lezcano
|
10b38e1280
zapnspark_v2: add updated parts list for v2 board
|
8 سال پیش |
|
Fernando Pablo Lopez-Lezcano
|
daf1792c4b
zapnspark_v2: move transistors a little closer to C3
|
8 سال پیش |
|
Fernando Pablo Lopez-Lezcano
|
60814fb9f6
zapnspark: add v2 board, double sided version that is smaller than before (smaller capacitors)
|
8 سال پیش |
|
Fernando Pablo Lopez-Lezcano
|
e0315b8e7b
octathingy: tweak external shock mount ring
|
8 سال پیش |
|
Fernando Pablo Lopez-Lezcano
|
c71b82f536
octathingy: parametrize external shock mount ring, change some variable names to match new design, add some reinforcement to the external ring
|
8 سال پیش |
|
Fernando Pablo Lopez-Lezcano
|
54d496851c
tinysphear: adjustments to the shock mount external ring
|
8 سال پیش |
|
Fernando Pablo Lopez-Lezcano
|
d95d70c8b2
octathingy: adjustments to the shock mount external ring
|
8 سال پیش |
|
Fernando Pablo Lopez-Lezcano
|
acb875f9d6
octathingy: tuning of parameters in the shock mount inner ring
|
8 سال پیش |
|
Fernando Pablo Lopez-Lezcano
|
9c0222cc01
octathingy: close a bit the slots for the rubber bands, should also help with printing the shock mount inner ring
|
8 سال پیش |
|
Fernando Pablo Lopez-Lezcano
|
11da86eafc
change size of lower windscreen ring to be bigger, otherwise there are problems with adhesion of the first layer of the print and most prints fail
|
8 سال پیش |
|
Fernando Pablo Lopez-Lezcano
|
9e113eed31
octathingy: tweak capsule array mount
|
8 سال پیش |
|
Fernando Pablo Lopez-Lezcano
|
e476ba35bb
octathingy: add proper angles and extra parameters for capsule mount legs
|
8 سال پیش |
|
Fernando Pablo Lopez-Lezcano
|
f87c86d4b8
add small ridge to capsule holders, make mount to stand right height (having problems printing the taller one), add experimental code for octathingy capsule connection legs when elevation of capsules is the right one
|
8 سال پیش |
|
Fernando Pablo Lopez-Lezcano
|
887d819a10
zapnspark: update board layout
|
8 سال پیش |
|
Fernando Pablo Lopez-Lezcano
|
a37acc2223
zapnspark: change R2/R5 to current 2.21K value
|
8 سال پیش |
|
Fernando Pablo Lopez-Lezcano
|
c679a99d39
zapnspark: move traces in PCB to the right layer (back), remove extra components from parts list
|
8 سال پیش |
|
Fernando Pablo Lopez-Lezcano
|
2b6253bfd0
sphear_plot_directions: remove old code, clean up, add support for Octathingy (but not yet for UV)
|
8 سال پیش |
|
Fernando Pablo Lopez-Lezcano
|
63f482be52
calibration common code: changes names of files to account for new Aliki, add some support for experimenting with array of filters for U/V instead of single filters like for WXYZ
|
8 سال پیش |
|
Fernando Pablo Lopez-Lezcano
|
5e0530b8fb
write encoder: add parameter for encoder name, make code compatible with both original Faust and Faust 2
|
8 سال پیش |
|
Fernando Pablo Lopez-Lezcano
|
2b299d9204
sphear_octa_af_calibrate: change code to use latest aliki from Fons that can handle 8 capsule microphones
|
8 سال پیش |
|
Fernando Pablo Lopez-Lezcano
|
f69dd3d9ae
sphear_design_fir_filters: remove leftover comment
|
8 سال پیش |
|
Fernando Pablo Lopez-Lezcano
|
b620c63117
sphear_design_fir_filters: fix n-1 mistake when making filters, fix linear phase code to match, remove old code
|
8 سال پیش |
|
Fernando Pablo Lopez-Lezcano
|
208f4eae69
return cable holes to original orientation (after some tests with alternative connections from stalk to capsule array)
|
8 سال پیش |
|
Fernando Pablo Lopez-Lezcano
|
6d3fdddd9c
Octathingy: rework capsule mount flare to have more open spaces, add rendering of new dsub connector flare, add walls to shock mount inner ring so columns cannot flex
|
8 سال پیش |
|
Fernando Pablo Lopez-Lezcano
|
e786aad467
Octathingy calibration: fix normalization of A2B matrix, the UV components were being boosted so signals close to full scale were being clipped, and then attenuated by the filters
|
8 سال پیش |
|
Fernando Pablo Lopez-Lezcano
|
9ec3c9d98b
add shock mount stops in Octathingy, rotate "front of microphone" mark
|
9 سال پیش |
|
Fernando Pablo Lopez-Lezcano
|
9be86c043e
remove TinySpHEAR code (four capsule microphone) for old shock mount (internal ring, external ring and connecting rods), add ridges and channels to guide rubber bands in internal ring, connect internal ring columns with walls so they cannot bend, add parameters for new shock mount, redo rendering code for the different parts, update EM182 and EM200 versions of the microphone to render the new shock mount
|
9 سال پیش |
|
Fernando Pablo Lopez-Lezcano
|
c37ffbf9c5
add stop/support for shock mount to upper flare of tetra mic, first version of new external ring for shock mount
|
9 سال پیش |
|
Fernando Pablo Lopez-Lezcano
|
79e4376888
start design of new version of tetra mic shock mount based on the mount shock for the Octathingy
|
9 سال پیش |
|
Fernando Pablo Lopez-Lezcano
|
56b4924ba9
remove temporary TFIR return parameter, some changes to parameters to function
|
9 سال پیش |
