 Fernando Pablo Lopez-Lezcano
|
16df77f3d7
adjust height of h2n columns to have a better press fit after a test print, make the capsule array stalk thicker and do proper scaling and positioning of the dot that signals the back of the microphone array
|
преди 9 години |
|
Fernando Pablo Lopez-Lezcano
|
5feffc4f08
fix thickness problem of h2n dial cover flare, add parameters to capsule array mount so that we can use a thicker microphone stalk in the h2n design - hopefully more robust
|
преди 9 години |
|
Fernando Pablo Lopez-Lezcano
|
699ddeeeca
h2n: major redesign, hide access to the top microphone mode selection dial as it is not really needed (the h2n needs to be in 4ch mode for the TinySpHEAR mod to work), with that disabled lower the bridge to touch the top of the h2n and hide the dial, use hull to get nicely smooth transitions, redo the columns to match - carefully match dimensions to the old column design as that was correctly hugging the h2n case, still need to test print the whole assembly so more tuning will probably happen soon
|
преди 9 години |
|
Fernando Pablo Lopez-Lezcano
|
1a38be2ce6
h2n: add marker for microphone orientation, rotate capsule array so that the right capsules point to the front
|
преди 9 години |
|
Fernando Pablo Lopez-Lezcano
|
2f4baabb29
fix a couple of details in the H2N preliminary code
|
преди 9 години |
|
Fernando Pablo Lopez-Lezcano
|
8b5ac6996d
trim sides of columns at the bottom, make the bridge smaller and cut the connector from the columns to have more space to route wires
|
преди 9 години |
|
Fernando Pablo Lopez-Lezcano
|
cb04cae2e8
h2n: major reorganization of the code, factor blocks into several modules, make everything tilt according to the angle of the support columns, clean up all the major and minor junctures between pieces, almost everything seems to fall into place automatically
|
преди 9 години |
|
Fernando Pablo Lopez-Lezcano
|
6e94c2d6f9
h2n: add parameter to control the fit between the columns and the bridge
|
преди 9 години |
|
Fernando Pablo Lopez-Lezcano
|
750c0b91ec
h2n: cut slots at the bottom of the columns so that we can install the bridge with the wires already threaded into the recorder
|
преди 9 години |
|
Fernando Pablo Lopez-Lezcano
|
304a0be9f6
h2n: bridge now renders correctly with no invisible gaps
|
преди 10 години |
|
Fernando Pablo Lopez-Lezcano
|
3104575ec4
h2n: change orientation of cylinder cutout in columns, this should print better
|
преди 10 години |
|
Fernando Pablo Lopez-Lezcano
|
389b4ed6b4
h2n: change triangular bridge to simple rounded rectangle, modularize most parts, many small changes in shapes - may not be a valid 2-manifold so we need to look at the fit of all parts so they fuse together
|
преди 10 години |
|
Fernando Pablo Lopez-Lezcano
|
d0d9ae83c4
add first try at H2N external capsule array
|
преди 10 години |
