 Fernando Pablo Lopez-Lezcano
|
1ac5128e2c
finalize initial version of microphone mount, cut slots in the sides of the cylinder for the capsule holder ridges - we still need to improve the geometry of the mount as it does not exactly match the expansion of the capsules when mid_radius is changed
|
11 år sedan |
|
Fernando Pablo Lopez-Lezcano
|
107c86ff91
recalculate parameters for the mount, add new version of mount that is parametric (almost working)
|
11 år sedan |
|
Fernando Pablo Lopez-Lezcano
|
f16febc2c0
completely rework mount == 2, legs are now completely parametric, it took me some time...
|
11 år sedan |
|
Fernando Pablo Lopez-Lezcano
|
f48706f90a
increase radius of the through hole in the mount
|
11 år sedan |
|
Fernando Pablo Lopez-Lezcano
|
664e3b9e3d
add a preliminary mount, the hole is used to insert a connecting rod to the box that houses the preamps, connectors and mount for the microphone stand
|
11 år sedan |
|
Fernando Pablo Lopez-Lezcano
|
803d0ec87d
remove old code for ridge at the back of the holder, it is not practical to print in the current best design (connect=2)
|
11 år sedan |
|
Fernando Pablo Lopez-Lezcano
|
6fb8b44744
make the beam thicker for connect=2 microphone, fudge factor increased to 0.15 from 0.1 for better microphone fit
|
11 år sedan |
|
Fernando Pablo Lopez-Lezcano
|
919df27adb
move model parameters to beginning of source code
|
11 år sedan |
|
Fernando Pablo Lopez-Lezcano
|
ac7fa31967
add third type of connection between holders, printed vertically and with interlocking - I still need to figure out the geometry to make it all parametric
|
11 år sedan |
|
Fernando Pablo Lopez-Lezcano
|
7baf6e1773
add second type of connection between holders, printed flat and with interlocking
|
11 år sedan |
|
Fernando Pablo Lopez-Lezcano
|
c9a251527b
lots of changes trying to optimize the shapes, the printout is not precise enough for the connecting rods
|
11 år sedan |
|
Fernando Pablo Lopez-Lezcano
|
9139578f48
fix indentation, add mounting stalk, remove connecting beams for bottom microphones
|
11 år sedan |
|
Fernando Pablo Lopez-Lezcano
|
fb04f09874
add first order microphone assembly, first try after one day work with openscad
|
11 år sedan |
