 Fernando Pablo Lopez-Lezcano
|
1aec65e225
slight change in leg fit for tighter assembly, redo microphone stand mount as one piece that clips into standard microphone mount (will redo all the wiring for the test microphone)
|
%!s(int64=10) %!d(string=hai) anos |
|
Fernando Pablo Lopez-Lezcano
|
206ac01df0
slight change of radius and leg thickness for horizontal legs, 10mm capsule
|
%!s(int64=10) %!d(string=hai) anos |
|
Fernando Pablo Lopez-Lezcano
|
af46822dba
tweak radius for vertical legs, return vertical legs to previous size, make stand mount cap thicker so that the stalk has better grip, use mount and sleeve to create the right shaped hole in the stand cap
|
%!s(int64=10) %!d(string=hai) anos |
|
Fernando Pablo Lopez-Lezcano
|
5fa41a392f
created a mount that clips on a standard microphone stand mount (and a cap that connects with the amb microphone mount), includes cable slots so that the fully assembled cables can be threaded through, added more variables for different wall thickness for the mount and sleeve
|
%!s(int64=10) %!d(string=hai) anos |
|
Fernando Pablo Lopez-Lezcano
|
67cb5a3edf
almost done with the parametrization of the microphone mount, I modified the capsule code to be able to use it to automatically create the right indentations in the mount - I still need to get the depth of the capsule holder indentations to be parametric, ties loose ends and clean up a lot of code
|
%!s(int64=10) %!d(string=hai) anos |
|
Fernando Pablo Lopez-Lezcano
|
59f74d0c0e
slice open the mount body so that we can fit already wired microphone capsules into the array, and add a mount sleeve to close the gap in the body, it should mount by snapping on top of the body - with this we have a proper mount that fits all wires
|
%!s(int64=10) %!d(string=hai) anos |
|
Fernando Pablo Lopez-Lezcano
|
33631412b6
with a ridge_width of 2.0 the four wires just fit perfectly around the ridge, so it looks like this mount design is a go
|
%!s(int64=10) %!d(string=hai) anos |
|
Fernando Pablo Lopez-Lezcano
|
7c1e107b09
go back to the initial idea of just one slot for the mount to see if we can fit all four wires inside the mount, add rounded rests for better support
|
%!s(int64=10) %!d(string=hai) anos |
|
Fernando Pablo Lopez-Lezcano
|
be9f762d95
the previous mount design cannot house the microphone cables - they are very thin but not thin enough to fit, so I am trying several other designs in this commit, we will have to route the cables externally it seems, ugly...
|
%!s(int64=10) %!d(string=hai) anos |
|
Fernando Pablo Lopez-Lezcano
|
a33f148be4
another round of the mount design, the previous one could not be printed correctly (we do not want knife edges in the vertical direction)
|
%!s(int64=10) %!d(string=hai) anos |
|
Fernando Pablo Lopez-Lezcano
|
cbb6a2ad8a
rework a bit the mount of the tetrahedral microphone, more exact fit into the ridges, still needs some geometry work so that everything fits exactly together
|
%!s(int64=10) %!d(string=hai) anos |
|
Fernando Pablo Lopez-Lezcano
|
4adf66d81e
renamed first order microphone file to TinySphEAR.scad
|
%!s(int64=11) %!d(string=hai) anos |
