 Fernando Pablo Lopez-Lezcano
|
604984fbd6
in TinySpHEAR go back to 1mm walls, 2 * that creates trouble printing, the material gets too hot because of the printing pattern and the shape is rough and bumpy, also remove the intermediate flare - we do not really need that for now
|
10 жил өмнө |
|
Fernando Pablo Lopez-Lezcano
|
9468249d5e
properly join the flares with the mount stalks introducing mint_thin slices for the hulls, make the wall of the flare constant thickness, make stalk the same thickness as the flare, add an additional transition between flare and stalk, add transition in the lip to avoid overhangs while printing, replace top ellipsoid microphone array mount in TinySpHEAR with a rounded box which gives better cable clearance
|
10 жил өмнө |
|
Fernando Pablo Lopez-Lezcano
|
47d8438cfd
remove ring_arm_gap as it is a global, reorder some parameters for clarity
|
10 жил өмнө |
|
Fernando Pablo Lopez-Lezcano
|
80d3885a52
move eyelet of shock mount from TinySpHEAR and Octathingy to SpHEAR_common, rework rendering of full shock mount
|
10 жил өмнө |
|
Fernando Pablo Lopez-Lezcano
|
43884ed6c0
move stand mount of shock mount from TinySpHEAR and Octathingy to SpHEAR_common
|
10 жил өмнө |
|
Fernando Pablo Lopez-Lezcano
|
066c4aa3d8
move ring connectors of shock mount from TinySpHEAR and Octathingy to SpHEAR_common
|
10 жил өмнө |
|
Fernando Pablo Lopez-Lezcano
|
7b08ce8c2e
move external ring of shock mount from TinySpHEAR and Octathingy to SpHEAR_common
|
10 жил өмнө |
|
Fernando Pablo Lopez-Lezcano
|
46c54db512
move internal ring of shock mount from TinySpHEAR and Octathingy to SpHEAR_common
|
10 жил өмнө |
|
Fernando Pablo Lopez-Lezcano
|
f4fd8cceda
move shared modules to SpHEAR_common, remove from TinySpHEAR and Octathingy mount_pcb files, change the names of some modules for readability
|
10 жил өмнө |
|
Fernando Pablo Lopez-Lezcano
|
2b2cbfbbd5
a couple of tweaks for better fit after printed
|
10 жил өмнө |
|
Fernando Pablo Lopez-Lezcano
|
85ad463b8c
tweak some tolerances for altest test print, calculate mount corner automatically
|
10 жил өмнө |
|
Fernando Pablo Lopez-Lezcano
|
ecfb059220
change pcb dimensions and tolerances, adjust parameters for ccrma logo
|
10 жил өмнө |
|
Fernando Pablo Lopez-Lezcano
|
6e48003c29
change length and width of pcb to match new design, parametrize several hard coded numbers, add space in front of and behind the printed circuit board, make main body more rounded, remove old version of main body, add dot in the microphone stalk marking the back of the microphone, add CCRMA logo to microphone body
|
10 жил өмнө |
|
Fernando Pablo Lopez-Lezcano
|
3f6a270667
really push changes to TinySpHEAR_common.scad, TinySpHEAR_mount_pcb.scad and TinySphEAR.scad
|
10 жил өмнө |
|
Fernando Pablo Lopez-Lezcano
|
38f7c51b4c
add proper fit to radius of top conic section
|
10 жил өмнө |
|
Fernando Pablo Lopez-Lezcano
|
92a7090ff8
another design for the outer ring of the shock mount
|
10 жил өмнө |
|
Fernando Pablo Lopez-Lezcano
|
87283f487e
add mount hub for shock mount
|
10 жил өмнө |
|
Fernando Pablo Lopez-Lezcano
|
c243c595ca
more improvements to inner rings of shock mount - add rounded corners in rubber band slots, make connecting bars fit with slots, add triangular fillet around bar holes
|
10 жил өмнө |
|
Fernando Pablo Lopez-Lezcano
|
519d7fd4f8
new version of body with just one slot at the bottom to make space for shielding the printed circuit boards; more work on the shock mount for the microphone assembly
|
10 жил өмнө |
|
Fernando Pablo Lopez-Lezcano
|
e2c2a4ffd4
fix the rounded corners of all boxes so that the wall is constant thickness, create another function for the support ring of the shock mount, calculate radius of support ring based on the approximate angle of the elastic bands and the separation between the body rings
|
10 жил өмнө |
|
Fernando Pablo Lopez-Lezcano
|
6f79316ce3
start work on a shock mount for the whole microphone assembly (the microphone sits on the shock mount)
|
10 жил өмнө |
|
Fernando Pablo Lopez-Lezcano
|
e75115f167
render capsules with more facets, tune some fits for new printer, add one more parameter to capsule code to better fit the mount slots to the capsule array, actually fix the sign of the previous fit parameter (was making things smaller, not bigger), modify calls to do the right thing
|
10 жил өмнө |
|
Fernando Pablo Lopez-Lezcano
|
98d24b539d
add rfit parameter to the capsule module, this is needed so that carving the slots for the conical section of the mount works better; also adjusted the radius of the conical section of the mount so that it fits the capsule array - the code there is probably not correct and needs to be revised
|
10 жил өмнө |
|
Fernando Pablo Lopez-Lezcano
|
71b503fac6
add a couple more parameters, first try at ccrma logo
|
10 жил өмнө |
|
Fernando Pablo Lopez-Lezcano
|
f28732e7ef
first try at including the microphone array in the complete design, include common scad file
|
10 жил өмнө |
|
Fernando Pablo Lopez-Lezcano
|
e4aa923e74
first iteration of a mount that holds four interface printed circuit boards
|
10 жил өмнө |
