 Wisam Reid
|
2399af3f45
Adding first draft calibration bracket
|
11 年之前 |
|
Wisam Reid
|
fc9b089471
fixed part labels for printing
|
11 年之前 |
|
Wisam Reid
|
fbee59d9c2
Filled in the section for printing Octathingy parts separately
|
11 年之前 |
|
Fernando Pablo Lopez-Lezcano
|
3f64d66464
the leg slots have now the correct depth, it does fix the big sphere build process, also separate more the individual pieces for the print otherwise some of the connecting legs get messed up
|
11 年之前 |
|
Fernando Pablo Lopez-Lezcano
|
b3770542fe
small fix for rendering the added rest for legs
|
11 年之前 |
|
Fernando Pablo Lopez-Lezcano
|
929e744186
add rest for legs - this may make it easier to assemble the structure (this needs to be optimized somehow), fix code for rendering just one capsule, try a new fit with a longer slot and thicker leg
|
11 年之前 |
|
Fernando Pablo Lopez-Lezcano
|
83367da9b2
add initial 20 capsule design to repository
|
11 年之前 |
|
Fernando Pablo Lopez-Lezcano
|
80c64a6157
add initial 12 capsule design to repository
|
11 年之前 |
|
Fernando Pablo Lopez-Lezcano
|
c97cbc8322
change name of octathingy scad file
|
11 年之前 |
|
Fernando Pablo Lopez-Lezcano
|
05eb62a091
Merge branch 'octathingy'
|
11 年之前 |
|
Fernando Pablo Lopez-Lezcano
|
4adf66d81e
renamed first order microphone file to TinySphEAR.scad
|
11 年之前 |
|
Fernando Pablo Lopez-Lezcano
|
06a6a6d07c
remove commented out code used in the old mount design
|
11 年之前 |
|
Fernando Pablo Lopez-Lezcano
|
0f602fed0e
increase the width of the mount ridge, we should do it asymmetric so that they do not bump into each other for microphone radius less than 9.5mm or so - at this point a microphone radius of 9.5mm seems like the minimum practical, 10mm is best
|
11 年之前 |
|
Fernando Pablo Lopez-Lezcano
|
3bf6c3081b
fix overhang in connecting legs for connect == 2
|
11 年之前 |
|
Fernando Pablo Lopez-Lezcano
|
2e875f6d8b
redo rendering of parts, locate mount in center and connect with a cross, this should print both connect == 1 and connect == 2 arrays
|
11 年之前 |
|
Fernando Pablo Lopez-Lezcano
|
4865888b24
render parts separately for both connect == 1 and connect == 2, tweak size of legs as 5mm seems to work best for connect == 2, otherwise the print is not very good
|
11 年之前 |
|
Fernando Pablo Lopez-Lezcano
|
06d3b254e9
leg_length still not quite correct, make mount slots wider, first successful try at connecting all separate parts so that the slicer treats them as one part - it looks like it is possible to print everything in one run
|
11 年之前 |
|
Fernando Pablo Lopez-Lezcano
|
59d1f28f62
fix slot depth in connect==1, I was missing the depth of the wall of the cylinder, start working on new mount model
|
11 年之前 |
|
Fernando Pablo Lopez-Lezcano
|
90f10e292f
first merge of changes from the octathingy microphone so that main modules are equivalent
|
11 年之前 |
|
Fernando Pablo Lopez-Lezcano
|
ccf4f240a9
changed name of the micrphone to TinySphEAR
|
11 年之前 |
|
Fernando Pablo Lopez-Lezcano
|
74cbee4387
add octathingy.scad code
|
11 年之前 |
|
Fernando Pablo Lopez-Lezcano
|
b71a430d19
some changes for printing tests, print only one part at a time
|
11 年之前 |
|
Fernando Pablo Lopez-Lezcano
|
58317e8641
make ridges that connect to the mount printable and smaller so that we can print a micrphone with radius 10mm - this could be tied to the size of the microphone shrinking when it is smaller
|
11 年之前 |
|
Fernando Pablo Lopez-Lezcano
|
6e40053926
remove old elev angle variable and replace with elev_angle
|
11 年之前 |
|
Fernando Pablo Lopez-Lezcano
|
e6a0a12b16
add elev_angle parameter (fixed for this microphone), remove tetra and redo all angle related calculations, figure out the geometry for slot depth for the connections between capsules
|
11 年之前 |
|
Fernando Pablo Lopez-Lezcano
|
0b0385ba4b
fix calculation of the mount geometric parameters, add calculation of slot depth for the mount, add small sloped ridge so that the capsule holder wall rests on the mount - we have to verify this can be printed
|
11 年之前 |
|
Fernando Pablo Lopez-Lezcano
|
7285ec4b9c
add "Spherical Ear" name...
|
11 年之前 |
|
Fernando Pablo Lopez-Lezcano
|
0de6f61cfa
add contact email, properly quote gpl license, minor wording tweaks for consistency
|
11 年之前 |
|
Fernando Pablo Lopez-Lezcano
|
1aadb47e3b
send list of mounts as a vector parameter, allows us to reuse the same code for the octathingy
|
11 年之前 |
|
Fernando Pablo Lopez-Lezcano
|
5121c53229
some code cleanups, finish up the final render of the microphone and individual parts for printing
|
11 年之前 |
