 Fernando Pablo Lopez-Lezcano
|
4adf66d81e
renamed first order microphone file to TinySphEAR.scad
|
пре 11 година |
|
Fernando Pablo Lopez-Lezcano
|
06a6a6d07c
remove commented out code used in the old mount design
|
пре 11 година |
|
Fernando Pablo Lopez-Lezcano
|
0f602fed0e
increase the width of the mount ridge, we should do it asymmetric so that they do not bump into each other for microphone radius less than 9.5mm or so - at this point a microphone radius of 9.5mm seems like the minimum practical, 10mm is best
|
пре 11 година |
|
Fernando Pablo Lopez-Lezcano
|
3bf6c3081b
fix overhang in connecting legs for connect == 2
|
пре 11 година |
|
Fernando Pablo Lopez-Lezcano
|
2e875f6d8b
redo rendering of parts, locate mount in center and connect with a cross, this should print both connect == 1 and connect == 2 arrays
|
пре 11 година |
|
Fernando Pablo Lopez-Lezcano
|
4865888b24
render parts separately for both connect == 1 and connect == 2, tweak size of legs as 5mm seems to work best for connect == 2, otherwise the print is not very good
|
пре 11 година |
|
Fernando Pablo Lopez-Lezcano
|
06d3b254e9
leg_length still not quite correct, make mount slots wider, first successful try at connecting all separate parts so that the slicer treats them as one part - it looks like it is possible to print everything in one run
|
пре 11 година |
|
Fernando Pablo Lopez-Lezcano
|
59d1f28f62
fix slot depth in connect==1, I was missing the depth of the wall of the cylinder, start working on new mount model
|
пре 11 година |
|
Fernando Pablo Lopez-Lezcano
|
90f10e292f
first merge of changes from the octathingy microphone so that main modules are equivalent
|
пре 11 година |
|
Fernando Pablo Lopez-Lezcano
|
ccf4f240a9
changed name of the micrphone to TinySphEAR
|
пре 11 година |
|
Fernando Pablo Lopez-Lezcano
|
b71a430d19
some changes for printing tests, print only one part at a time
|
пре 11 година |
|
Fernando Pablo Lopez-Lezcano
|
58317e8641
make ridges that connect to the mount printable and smaller so that we can print a micrphone with radius 10mm - this could be tied to the size of the microphone shrinking when it is smaller
|
пре 11 година |
|
Fernando Pablo Lopez-Lezcano
|
6e40053926
remove old elev angle variable and replace with elev_angle
|
пре 11 година |
|
Fernando Pablo Lopez-Lezcano
|
e6a0a12b16
add elev_angle parameter (fixed for this microphone), remove tetra and redo all angle related calculations, figure out the geometry for slot depth for the connections between capsules
|
пре 11 година |
|
Fernando Pablo Lopez-Lezcano
|
0b0385ba4b
fix calculation of the mount geometric parameters, add calculation of slot depth for the mount, add small sloped ridge so that the capsule holder wall rests on the mount - we have to verify this can be printed
|
пре 11 година |
|
Fernando Pablo Lopez-Lezcano
|
7285ec4b9c
add "Spherical Ear" name...
|
пре 11 година |
|
Fernando Pablo Lopez-Lezcano
|
0de6f61cfa
add contact email, properly quote gpl license, minor wording tweaks for consistency
|
пре 11 година |
|
Fernando Pablo Lopez-Lezcano
|
1aadb47e3b
send list of mounts as a vector parameter, allows us to reuse the same code for the octathingy
|
пре 11 година |
|
Fernando Pablo Lopez-Lezcano
|
5121c53229
some code cleanups, finish up the final render of the microphone and individual parts for printing
|
пре 11 година |
|
Fernando Pablo Lopez-Lezcano
|
1ac5128e2c
finalize initial version of microphone mount, cut slots in the sides of the cylinder for the capsule holder ridges - we still need to improve the geometry of the mount as it does not exactly match the expansion of the capsules when mid_radius is changed
|
пре 11 година |
|
Fernando Pablo Lopez-Lezcano
|
107c86ff91
recalculate parameters for the mount, add new version of mount that is parametric (almost working)
|
пре 11 година |
|
Fernando Pablo Lopez-Lezcano
|
f16febc2c0
completely rework mount == 2, legs are now completely parametric, it took me some time...
|
пре 11 година |
|
Fernando Pablo Lopez-Lezcano
|
f48706f90a
increase radius of the through hole in the mount
|
пре 11 година |
|
Fernando Pablo Lopez-Lezcano
|
664e3b9e3d
add a preliminary mount, the hole is used to insert a connecting rod to the box that houses the preamps, connectors and mount for the microphone stand
|
пре 11 година |
|
Fernando Pablo Lopez-Lezcano
|
803d0ec87d
remove old code for ridge at the back of the holder, it is not practical to print in the current best design (connect=2)
|
пре 11 година |
|
Fernando Pablo Lopez-Lezcano
|
6fb8b44744
make the beam thicker for connect=2 microphone, fudge factor increased to 0.15 from 0.1 for better microphone fit
|
пре 11 година |
|
Fernando Pablo Lopez-Lezcano
|
919df27adb
move model parameters to beginning of source code
|
пре 11 година |
|
Fernando Pablo Lopez-Lezcano
|
ac7fa31967
add third type of connection between holders, printed vertically and with interlocking - I still need to figure out the geometry to make it all parametric
|
пре 11 година |
|
Fernando Pablo Lopez-Lezcano
|
7baf6e1773
add second type of connection between holders, printed flat and with interlocking
|
пре 11 година |
|
Fernando Pablo Lopez-Lezcano
|
c9a251527b
lots of changes trying to optimize the shapes, the printout is not precise enough for the connecting rods
|
пре 11 година |
