 Fernando Pablo Lopez-Lezcano
|
4bd79f8126
fix sampling rate in a-format calibrated soundfiles
|
9 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
49220ca21e
add Octathingy DB-25 prototype connector wiring
|
9 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
7ef85d90be
add 12 pin DIN connector wiring diagram
|
9 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
4357306503
add upper flare and stalk to new H2N bridge code, add locking screw to one of the columns of the H2N base
|
9 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
0c265d05ee
redesign the Octathingy upper flare to be shorter and similar to the quad capsule design, resize windscreen to match new design, tie windscreen mounting thread size to radius of main body
|
9 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
66e0aea105
do not rotate mount in lower windscreen
|
9 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
6cb13ab7c0
redesign Octathingy flare to capsule array to match body, add rendering of windscreen components
|
9 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
119baa4d84
remove windscreen components from the TinySpHEAR_mount_pcb file
|
9 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
e4f117f019
split H2N EM200 rendering to a separate file (like for other microphones), change rendering of the body of the H2N array so that we can mount a windscreen on it (leave old stuff as _no_ws modules for now), make the windscreen the same as for the SpHEAR EM200 standalone microphone
|
9 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
4df9474e70
add windscreen code to render upper and lower windscreen frames, add thread cover, lower facets for rendering helixes to use less memory, move some parameters to the windscreen file
|
9 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
961d7d3936
start moving windscreen components to a separate file
|
9 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
e5018bbe57
remove old rectangular body and flare octathingy code
|
9 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
941a88c195
change octathingy body code to be simpler and correct
|
9 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
56039df74e
twist the pcb's so that there is more space for the big electrolytic capacitor and all boards can be packed in a smaller space - but this one is too small, soldering both sides would be a pain
|
9 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
a25bc7225d
complete redesign of the body of the Octathingy, all eight phantom power interfaces are now arranged radially instead of in two groups of four, this makes the body symmetrical and less ugly but it is still very bulky as before - this will also make it easier to incorporate a windscreen mount
|
9 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
ad103a6c45
ignore stl, gcode and backup files in local copy
|
9 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
4f7f1dd167
a few changes and additions to the "building the microphone" document
|
9 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
7db95bf5b5
add new capsule array mount that works with a fully symmetrical array print, change location of center of microphone marker, add a lot of code (including discarded tests) for the windscreen support frame
|
9 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
fa83090c8e
render a tetrahedral capsule array with all capsules having three standard horizontal legs, they all interlock much better than before and the geometry of the array is almost perfect without having to visually look at it while glueing the capsules together
|
9 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
4c27b20bd7
add code to capsule module to be able to render the modified array mount with a fully symmetrical array (all capsules with three standard horizontal legs)
|
9 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
eaf9a7a19a
h2n windscreen: many changes to the windscreen design, add slanted bottom beams and reinforce them so they print fine (still to be tested)
|
9 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
0bfd5411ef
properly calculate thread depth and various radii, add external hexagon trim to windscreen mount
|
9 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
ccbb2e3b20
sphear windscreen improvements, switch to a thread based attachment of the windscreen to the microphone, many fixes, add render functions, modify em200 version to render the full microphone including the windscreen
|
9 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
ec80d68919
the windscreen support mesh with four double helixes is not really printable in one go, the quality of the beams degrade as the structure gets taller - so split it into two sections (maybe we will need three) and move to six double helixes so that the slope of the beams is less and the print quality is better
|
9 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
9abf232f1f
first try at windscreen support using helical structures, suggested by Huw McGregor (who is building his own arrays) at BEAST Feast 2017
|
9 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
8752948b6e
add eight screw holes to join the microphone body with the two flares, replaces the snap joints (which are still available through a configuration variable)
|
9 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
91695fe1fe
make the snap joints in the SpHEAR microphone body optional
|
9 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
aabd55e00c
adjust relative position of components when rendering the full shock mount assembly
|
9 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
514e1b61a7
add bash script to convert H2N XY/MS files to a four channel A format file
|
9 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
b4c2c3cbbb
add script to post-process tracks recorded with an H2N into foru A format files
|
9 gadi atpakaļ |
