 Fernando Pablo Lopez-Lezcano
|
eaf9a7a19a
h2n windscreen: many changes to the windscreen design, add slanted bottom beams and reinforce them so they print fine (still to be tested)
|
9 лет назад |
|
Fernando Pablo Lopez-Lezcano
|
0bfd5411ef
properly calculate thread depth and various radii, add external hexagon trim to windscreen mount
|
9 лет назад |
|
Fernando Pablo Lopez-Lezcano
|
ccbb2e3b20
sphear windscreen improvements, switch to a thread based attachment of the windscreen to the microphone, many fixes, add render functions, modify em200 version to render the full microphone including the windscreen
|
9 лет назад |
|
Fernando Pablo Lopez-Lezcano
|
ec80d68919
the windscreen support mesh with four double helixes is not really printable in one go, the quality of the beams degrade as the structure gets taller - so split it into two sections (maybe we will need three) and move to six double helixes so that the slope of the beams is less and the print quality is better
|
9 лет назад |
|
Fernando Pablo Lopez-Lezcano
|
9abf232f1f
first try at windscreen support using helical structures, suggested by Huw McGregor (who is building his own arrays) at BEAST Feast 2017
|
9 лет назад |
|
Fernando Pablo Lopez-Lezcano
|
8752948b6e
add eight screw holes to join the microphone body with the two flares, replaces the snap joints (which are still available through a configuration variable)
|
9 лет назад |
|
Fernando Pablo Lopez-Lezcano
|
91695fe1fe
make the snap joints in the SpHEAR microphone body optional
|
9 лет назад |
|
Fernando Pablo Lopez-Lezcano
|
aabd55e00c
adjust relative position of components when rendering the full shock mount assembly
|
9 лет назад |
|
Fernando Pablo Lopez-Lezcano
|
5feffc4f08
fix thickness problem of h2n dial cover flare, add parameters to capsule array mount so that we can use a thicker microphone stalk in the h2n design - hopefully more robust
|
9 лет назад |
|
Fernando Pablo Lopez-Lezcano
|
b271172a4e
fix size of sleeve in the capsule array so that it works with the new interconnection legs - but it still needs the proper geometry automatic calculation
|
9 лет назад |
|
Fernando Pablo Lopez-Lezcano
|
23208763ed
refactor flare code into one flare module and addition modules for connector, cable and capsule array stalk
|
9 лет назад |
|
Fernando Pablo Lopez-Lezcano
|
93f1b33b9d
change design of bottom connector housing to use only the core metal part of the connector, much simpler and easier to attach using the two screws included with the connector (that would normally attach the internal strain relief); remove unnecessary external connector lock collar; redesign snap joint so that arm is stronger - this is still not optimal
|
9 лет назад |
|
Fernando Pablo Lopez-Lezcano
|
8560803359
add new capsule holder connection legs, horizontal with slanted top and dual fingers with support, interlocks much better than the previous version but only works for small microphone array radius (no error checking at this point), this is now the default; add bottom flare to microphone body that can house a 12 pin connector, includes a side collar that locks the connector in place; add click locks for snapping the top and bottom flares to the body of the microphone; modify the capsule array mount to include four holes for the individual capsule cables so that there is no connection to the resonant cavity below; change defaults for the mount so that the bottom two capsules snap more securely into the mount
|
9 лет назад |
|
Fernando Pablo Lopez-Lezcano
|
b8eb2f8f92
some tolerance changes for better fit of the parts, fix shock mount eyelet, add hexagonal screw head insert to the stand mount eyelet so that the screw locks properly
|
10 лет назад |
|
Fernando Pablo Lopez-Lezcano
|
89226e2fec
make corners of body more rounded
|
10 лет назад |
|
Fernando Pablo Lopez-Lezcano
|
88df995d33
re-add side slices of the top of the mount for better cable management, change to proper dimensional parameters so that it works for both 10 and 14mm capsule diameters
|
10 лет назад |
|
Fernando Pablo Lopez-Lezcano
|
5fccdc9de7
shave top of mount slots to get rid of problematic ridge, also add - disabled for now, just testing this - slicing of the top sides of the mount
|
10 лет назад |
|
Fernando Pablo Lopez-Lezcano
|
c746cf4c8c
add better mounting slot in the microphone mount for the four capsule array to fit it, this is much more solid than before although not perfect
|
10 лет назад |
|
Fernando Pablo Lopez-Lezcano
|
bb36093ef1
fix radius of upper capsule array mount to have enough space for the wires
|
10 лет назад |
|
Fernando Pablo Lopez-Lezcano
|
604984fbd6
in TinySpHEAR go back to 1mm walls, 2 * that creates trouble printing, the material gets too hot because of the printing pattern and the shape is rough and bumpy, also remove the intermediate flare - we do not really need that for now
|
10 лет назад |
|
Fernando Pablo Lopez-Lezcano
|
9468249d5e
properly join the flares with the mount stalks introducing mint_thin slices for the hulls, make the wall of the flare constant thickness, make stalk the same thickness as the flare, add an additional transition between flare and stalk, add transition in the lip to avoid overhangs while printing, replace top ellipsoid microphone array mount in TinySpHEAR with a rounded box which gives better cable clearance
|
10 лет назад |
|
Fernando Pablo Lopez-Lezcano
|
47d8438cfd
remove ring_arm_gap as it is a global, reorder some parameters for clarity
|
10 лет назад |
|
Fernando Pablo Lopez-Lezcano
|
80d3885a52
move eyelet of shock mount from TinySpHEAR and Octathingy to SpHEAR_common, rework rendering of full shock mount
|
10 лет назад |
|
Fernando Pablo Lopez-Lezcano
|
43884ed6c0
move stand mount of shock mount from TinySpHEAR and Octathingy to SpHEAR_common
|
10 лет назад |
|
Fernando Pablo Lopez-Lezcano
|
066c4aa3d8
move ring connectors of shock mount from TinySpHEAR and Octathingy to SpHEAR_common
|
10 лет назад |
|
Fernando Pablo Lopez-Lezcano
|
7b08ce8c2e
move external ring of shock mount from TinySpHEAR and Octathingy to SpHEAR_common
|
10 лет назад |
|
Fernando Pablo Lopez-Lezcano
|
46c54db512
move internal ring of shock mount from TinySpHEAR and Octathingy to SpHEAR_common
|
10 лет назад |
|
Fernando Pablo Lopez-Lezcano
|
f4fd8cceda
move shared modules to SpHEAR_common, remove from TinySpHEAR and Octathingy mount_pcb files, change the names of some modules for readability
|
10 лет назад |
|
Fernando Pablo Lopez-Lezcano
|
2b2cbfbbd5
a couple of tweaks for better fit after printed
|
10 лет назад |
|
Fernando Pablo Lopez-Lezcano
|
85ad463b8c
tweak some tolerances for altest test print, calculate mount corner automatically
|
10 лет назад |
