 Fernando Pablo Lopez-Lezcano
|
2d4e4f3046
remove redundant transformations from Octathingy mount code
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
21ae5d7853
Octathingy, add transition to main body to avoid overhang on lower lip
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
298302b057
in Octathingy remove extra intermediate flare
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
1681a433e6
in Octathingy also go back to 1mm walls, 2 * that creates trouble printing
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
4c02aae4e6
tune mount_radius for the Octathingy to hold 8 wires with room to spare (could even be 3.5), fix size of extrusion used to indent the top of the mount
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
c5caa1ae50
small fix to octa_mount_flare_dual to properly center the top internal flare - it was lopsided
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
5fdaba3cb9
add extra transition to flare to capsule stalk, make stalk wall thicker to match the flare, change the Octathingy flare to wall to be printable, add transition to lip to avoid overhangs, make internal flare thicker so that there are no overhangs at the entry to the cable holes, make the array mount wall thicker to match the stalk
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
9468249d5e
properly join the flares with the mount stalks introducing mint_thin slices for the hulls, make the wall of the flare constant thickness, make stalk the same thickness as the flare, add an additional transition between flare and stalk, add transition in the lip to avoid overhangs while printing, replace top ellipsoid microphone array mount in TinySpHEAR with a rounded box which gives better cable clearance
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
71197a3f1b
rotate logo so it is not obscured by the shock mount, adjust dimensions of shock mount to match microphone body
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
80d3885a52
move eyelet of shock mount from TinySpHEAR and Octathingy to SpHEAR_common, rework rendering of full shock mount
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
43884ed6c0
move stand mount of shock mount from TinySpHEAR and Octathingy to SpHEAR_common
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
066c4aa3d8
move ring connectors of shock mount from TinySpHEAR and Octathingy to SpHEAR_common
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
7b08ce8c2e
move external ring of shock mount from TinySpHEAR and Octathingy to SpHEAR_common
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
46c54db512
move internal ring of shock mount from TinySpHEAR and Octathingy to SpHEAR_common
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
61d16c97d7
start work on shock mount for Octathingy
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
f4fd8cceda
move shared modules to SpHEAR_common, remove from TinySpHEAR and Octathingy mount_pcb files, change the names of some modules for readability
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
e3d85bb82b
add Octathingy design optimized for EM200 capsules, fix a couple of issues in the mount
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
b1a284bc77
add Octathingy model with a microphone mount for the zapnspark boards
|
10 rokov pred |
