 Fernando Pablo Lopez-Lezcano
|
74cbee4387
add octathingy.scad code
|
11 年 前 |
|
Fernando Pablo Lopez-Lezcano
|
58317e8641
make ridges that connect to the mount printable and smaller so that we can print a micrphone with radius 10mm - this could be tied to the size of the microphone shrinking when it is smaller
|
11 年 前 |
|
Fernando Pablo Lopez-Lezcano
|
6e40053926
remove old elev angle variable and replace with elev_angle
|
11 年 前 |
|
Fernando Pablo Lopez-Lezcano
|
e6a0a12b16
add elev_angle parameter (fixed for this microphone), remove tetra and redo all angle related calculations, figure out the geometry for slot depth for the connections between capsules
|
11 年 前 |
|
Fernando Pablo Lopez-Lezcano
|
0b0385ba4b
fix calculation of the mount geometric parameters, add calculation of slot depth for the mount, add small sloped ridge so that the capsule holder wall rests on the mount - we have to verify this can be printed
|
11 年 前 |
|
Fernando Pablo Lopez-Lezcano
|
7285ec4b9c
add "Spherical Ear" name...
|
11 年 前 |
|
Fernando Pablo Lopez-Lezcano
|
0de6f61cfa
add contact email, properly quote gpl license, minor wording tweaks for consistency
|
11 年 前 |
|
Fernando Pablo Lopez-Lezcano
|
1aadb47e3b
send list of mounts as a vector parameter, allows us to reuse the same code for the octathingy
|
11 年 前 |
|
Fernando Pablo Lopez-Lezcano
|
5121c53229
some code cleanups, finish up the final render of the microphone and individual parts for printing
|
11 年 前 |
|
Fernando Pablo Lopez-Lezcano
|
1ac5128e2c
finalize initial version of microphone mount, cut slots in the sides of the cylinder for the capsule holder ridges - we still need to improve the geometry of the mount as it does not exactly match the expansion of the capsules when mid_radius is changed
|
11 年 前 |
|
Fernando Pablo Lopez-Lezcano
|
107c86ff91
recalculate parameters for the mount, add new version of mount that is parametric (almost working)
|
11 年 前 |
|
Fernando Pablo Lopez-Lezcano
|
f16febc2c0
completely rework mount == 2, legs are now completely parametric, it took me some time...
|
11 年 前 |
|
Fernando Pablo Lopez-Lezcano
|
f48706f90a
increase radius of the through hole in the mount
|
11 年 前 |
|
Fernando Pablo Lopez-Lezcano
|
664e3b9e3d
add a preliminary mount, the hole is used to insert a connecting rod to the box that houses the preamps, connectors and mount for the microphone stand
|
11 年 前 |
|
Fernando Pablo Lopez-Lezcano
|
803d0ec87d
remove old code for ridge at the back of the holder, it is not practical to print in the current best design (connect=2)
|
11 年 前 |
|
Fernando Pablo Lopez-Lezcano
|
6fb8b44744
make the beam thicker for connect=2 microphone, fudge factor increased to 0.15 from 0.1 for better microphone fit
|
11 年 前 |
|
Fernando Pablo Lopez-Lezcano
|
919df27adb
move model parameters to beginning of source code
|
11 年 前 |
|
Fernando Pablo Lopez-Lezcano
|
ac7fa31967
add third type of connection between holders, printed vertically and with interlocking - I still need to figure out the geometry to make it all parametric
|
11 年 前 |
|
Fernando Pablo Lopez-Lezcano
|
7baf6e1773
add second type of connection between holders, printed flat and with interlocking
|
11 年 前 |
|
Fernando Pablo Lopez-Lezcano
|
c9a251527b
lots of changes trying to optimize the shapes, the printout is not precise enough for the connecting rods
|
11 年 前 |
|
Fernando Pablo Lopez-Lezcano
|
9139578f48
fix indentation, add mounting stalk, remove connecting beams for bottom microphones
|
11 年 前 |
|
Fernando Pablo Lopez-Lezcano
|
fb04f09874
add first order microphone assembly, first try after one day work with openscad
|
11 年 前 |
|
Fernando Lopez-Lezcano
|
b33de3d705
add initial empty README
|
11 年 前 |
