 Fernando Pablo Lopez-Lezcano
|
a88b11704f
initial design of a printable test rig based on the microphone stand mount, it is all flat printable and includes a lever to rotate the capsule holder and a detente that stops rotation at 0 and 90 degrees (cleverly done, I think) - tolerances will have to be added after test prints
|
10 роки тому |
|
Fernando Pablo Lopez-Lezcano
|
0116a9ab99
modularize code for capsule test rig
|
10 роки тому |
|
Fernando Pablo Lopez-Lezcano
|
94f5ef0848
a few tweaks in the dimensions of the contact plate and contact position for the test rig capsule holder
|
10 роки тому |
|
Fernando Pablo Lopez-Lezcano
|
d177de29d4
even more tuning of capsule holder for test rig, thicker back plate for less flex, move contacts around a bit - we may need to decrease the diameter of the holder as the capsule should have a tighter fit as the contact springs push the capsule out
|
11 роки тому |
|
Fernando Pablo Lopez-Lezcano
|
8e01706188
more tuning of capsule holder for test rig, added sleeve to model that holds everything together - we need to add more back pressure for the contacts as they are not reliable, more tests needed
|
11 роки тому |
|
Fernando Pablo Lopez-Lezcano
|
e5c977b2df
more tuning of dimensions for capsule holder for test rig
|
11 роки тому |
|
Fernando Pablo Lopez-Lezcano
|
27bc8d3a84
redo capsule holder for test rig, getting closer to a working design
|
11 роки тому |
|
Fernando Pablo Lopez-Lezcano
|
4800fd22b4
add capsule holder for testing microphones, includes slots for spring contacts
|
11 роки тому |
