 Fernando Pablo Lopez-Lezcano
|
c5caa1ae50
small fix to octa_mount_flare_dual to properly center the top internal flare - it was lopsided
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
5fdaba3cb9
add extra transition to flare to capsule stalk, make stalk wall thicker to match the flare, change the Octathingy flare to wall to be printable, add transition to lip to avoid overhangs, make internal flare thicker so that there are no overhangs at the entry to the cable holes, make the array mount wall thicker to match the stalk
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
9468249d5e
properly join the flares with the mount stalks introducing mint_thin slices for the hulls, make the wall of the flare constant thickness, make stalk the same thickness as the flare, add an additional transition between flare and stalk, add transition in the lip to avoid overhangs while printing, replace top ellipsoid microphone array mount in TinySpHEAR with a rounded box which gives better cable clearance
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
47d8438cfd
remove ring_arm_gap as it is a global, reorder some parameters for clarity
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
71197a3f1b
rotate logo so it is not obscured by the shock mount, adjust dimensions of shock mount to match microphone body
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
80d3885a52
move eyelet of shock mount from TinySpHEAR and Octathingy to SpHEAR_common, rework rendering of full shock mount
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
43884ed6c0
move stand mount of shock mount from TinySpHEAR and Octathingy to SpHEAR_common
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
066c4aa3d8
move ring connectors of shock mount from TinySpHEAR and Octathingy to SpHEAR_common
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
7b08ce8c2e
move external ring of shock mount from TinySpHEAR and Octathingy to SpHEAR_common
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
46c54db512
move internal ring of shock mount from TinySpHEAR and Octathingy to SpHEAR_common
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
61d16c97d7
start work on shock mount for Octathingy
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
f4fd8cceda
move shared modules to SpHEAR_common, remove from TinySpHEAR and Octathingy mount_pcb files, change the names of some modules for readability
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
54e225167d
add EM182 and EM200 documentation and specs
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
8f854699e0
add new shared include in TinySpHEAR EM182 and EM200 models
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
e3d85bb82b
add Octathingy design optimized for EM200 capsules, fix a couple of issues in the mount
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
b1a284bc77
add Octathingy model with a microphone mount for the zapnspark boards
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
98c5b937ae
start merging the Octathingy code into the current code base, move the capsule holder and some parameters into a separate file (SpHEAR_common), finally fix the code that calculates the depth of the slot that creates the interlocking fingers that hold the array together - turns out there are two cases delimited by the angle between adyacent capsules, the code now works for both the TinySpHEAR and the Octathingy arrays
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
b5463e2760
added very brief descriptions of the PCB design and calibration software
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
67b476c7a5
rotate pictures, adjust width of pictures in page
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
ad85d047f3
add more pictures of the second prototype
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
e90daa5efc
trying to figure out gitlab markup...
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
76cddebf07
documentation tuning
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
f1f46429ed
add reference to second prototype page
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
c96fbcf602
add start of documentation for second and third prototypes and matching picture
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
70216b43c9
latest PCB render, some minor changes
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
2b2cbfbbd5
a couple of tweaks for better fit after printed
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
85ad463b8c
tweak some tolerances for altest test print, calculate mount corner automatically
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
357524d3bf
fixed 2-manifold issue with logo by splitting one of the polygons
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
79285ed19c
ccrma logo: changed automatically generated names to more meaningful names
|
10 rokov pred |
|
Fernando Pablo Lopez-Lezcano
|
ecfb059220
change pcb dimensions and tolerances, adjust parameters for ccrma logo
|
10 rokov pred |
