 Fernando Pablo Lopez-Lezcano
|
c746cf4c8c
add better mounting slot in the microphone mount for the four capsule array to fit it, this is much more solid than before although not perfect
|
há 10 anos atrás |
|
Fernando Pablo Lopez-Lezcano
|
3b5d861dd0
changed all pads to be 1.99mm as there were problems with some components lifting the tracks when flexed - for example C2 and C4, hopefully this will fix this issue
|
há 10 anos atrás |
|
Fernando Pablo Lopez-Lezcano
|
1d0e414fbc
zapnspark pcb: a few more tweaks to the component layer
|
há 10 anos atrás |
|
Fernando Pablo Lopez-Lezcano
|
b094d811ab
zapnspark pcb layout: move component names and values to readable places (but printout is still copper side)
|
há 10 anos atrás |
|
Fernando Pablo Lopez-Lezcano
|
bb36093ef1
fix radius of upper capsule array mount to have enough space for the wires
|
há 10 anos atrás |
|
Fernando Pablo Lopez-Lezcano
|
2d4e4f3046
remove redundant transformations from Octathingy mount code
|
há 10 anos atrás |
|
Fernando Pablo Lopez-Lezcano
|
21ae5d7853
Octathingy, add transition to main body to avoid overhang on lower lip
|
há 10 anos atrás |
|
Fernando Pablo Lopez-Lezcano
|
298302b057
in Octathingy remove extra intermediate flare
|
há 10 anos atrás |
|
Fernando Pablo Lopez-Lezcano
|
1681a433e6
in Octathingy also go back to 1mm walls, 2 * that creates trouble printing
|
há 10 anos atrás |
|
Fernando Pablo Lopez-Lezcano
|
604984fbd6
in TinySpHEAR go back to 1mm walls, 2 * that creates trouble printing, the material gets too hot because of the printing pattern and the shape is rough and bumpy, also remove the intermediate flare - we do not really need that for now
|
há 10 anos atrás |
|
Fernando Pablo Lopez-Lezcano
|
4c02aae4e6
tune mount_radius for the Octathingy to hold 8 wires with room to spare (could even be 3.5), fix size of extrusion used to indent the top of the mount
|
há 10 anos atrás |
|
Fernando Pablo Lopez-Lezcano
|
c5caa1ae50
small fix to octa_mount_flare_dual to properly center the top internal flare - it was lopsided
|
há 10 anos atrás |
|
Fernando Pablo Lopez-Lezcano
|
5fdaba3cb9
add extra transition to flare to capsule stalk, make stalk wall thicker to match the flare, change the Octathingy flare to wall to be printable, add transition to lip to avoid overhangs, make internal flare thicker so that there are no overhangs at the entry to the cable holes, make the array mount wall thicker to match the stalk
|
há 10 anos atrás |
|
Fernando Pablo Lopez-Lezcano
|
9468249d5e
properly join the flares with the mount stalks introducing mint_thin slices for the hulls, make the wall of the flare constant thickness, make stalk the same thickness as the flare, add an additional transition between flare and stalk, add transition in the lip to avoid overhangs while printing, replace top ellipsoid microphone array mount in TinySpHEAR with a rounded box which gives better cable clearance
|
há 10 anos atrás |
|
Fernando Pablo Lopez-Lezcano
|
47d8438cfd
remove ring_arm_gap as it is a global, reorder some parameters for clarity
|
há 10 anos atrás |
|
Fernando Pablo Lopez-Lezcano
|
71197a3f1b
rotate logo so it is not obscured by the shock mount, adjust dimensions of shock mount to match microphone body
|
há 10 anos atrás |
|
Fernando Pablo Lopez-Lezcano
|
80d3885a52
move eyelet of shock mount from TinySpHEAR and Octathingy to SpHEAR_common, rework rendering of full shock mount
|
há 10 anos atrás |
|
Fernando Pablo Lopez-Lezcano
|
43884ed6c0
move stand mount of shock mount from TinySpHEAR and Octathingy to SpHEAR_common
|
há 10 anos atrás |
|
Fernando Pablo Lopez-Lezcano
|
066c4aa3d8
move ring connectors of shock mount from TinySpHEAR and Octathingy to SpHEAR_common
|
há 10 anos atrás |
|
Fernando Pablo Lopez-Lezcano
|
7b08ce8c2e
move external ring of shock mount from TinySpHEAR and Octathingy to SpHEAR_common
|
há 10 anos atrás |
|
Fernando Pablo Lopez-Lezcano
|
46c54db512
move internal ring of shock mount from TinySpHEAR and Octathingy to SpHEAR_common
|
há 10 anos atrás |
|
Fernando Pablo Lopez-Lezcano
|
61d16c97d7
start work on shock mount for Octathingy
|
há 10 anos atrás |
|
Fernando Pablo Lopez-Lezcano
|
f4fd8cceda
move shared modules to SpHEAR_common, remove from TinySpHEAR and Octathingy mount_pcb files, change the names of some modules for readability
|
há 10 anos atrás |
|
Fernando Pablo Lopez-Lezcano
|
54e225167d
add EM182 and EM200 documentation and specs
|
há 10 anos atrás |
|
Fernando Pablo Lopez-Lezcano
|
8f854699e0
add new shared include in TinySpHEAR EM182 and EM200 models
|
há 10 anos atrás |
|
Fernando Pablo Lopez-Lezcano
|
e3d85bb82b
add Octathingy design optimized for EM200 capsules, fix a couple of issues in the mount
|
há 10 anos atrás |
|
Fernando Pablo Lopez-Lezcano
|
b1a284bc77
add Octathingy model with a microphone mount for the zapnspark boards
|
há 10 anos atrás |
|
Fernando Pablo Lopez-Lezcano
|
98c5b937ae
start merging the Octathingy code into the current code base, move the capsule holder and some parameters into a separate file (SpHEAR_common), finally fix the code that calculates the depth of the slot that creates the interlocking fingers that hold the array together - turns out there are two cases delimited by the angle between adyacent capsules, the code now works for both the TinySpHEAR and the Octathingy arrays
|
há 10 anos atrás |
|
Fernando Pablo Lopez-Lezcano
|
b5463e2760
added very brief descriptions of the PCB design and calibration software
|
há 10 anos atrás |
|
Fernando Pablo Lopez-Lezcano
|
67b476c7a5
rotate pictures, adjust width of pictures in page
|
há 10 anos atrás |
