 Fernando Pablo Lopez-Lezcano
|
704ea58285
tweak parameters for the 10mm EM182 print, remove code that has been moved to TinySpHEAR_common, change capsule module interface to match the new code
|
пре 10 година |
|
Fernando Pablo Lopez-Lezcano
|
d57bec9bb3
we need a thicker stalk and conic mount section, otherwise wires do not fit - reality check
|
пре 10 година |
|
Fernando Pablo Lopez-Lezcano
|
baa4906f96
change conic section to sllipsoid so there is more room for the cables
|
пре 10 година |
|
Fernando Pablo Lopez-Lezcano
|
f065346d8f
remove old unused code and variables from TinySpHEAR, some tweaks to comments
|
пре 10 година |
|
Fernando Pablo Lopez-Lezcano
|
de02365217
add a parameter to the capsule module so that we can make the slot in the mount narrower for a tighter fit, test rig: first test prints of the parts, tweak tolerances so that all pieces fit together, I need to adjust the length of the stalk and the size of the adapter so that the stalk does not move and the skirt is longer so that it grabs better the mount cylinder - the concept works fine and the stop for 0 and 90 degrees works as intended
|
пре 10 година |
|
Fernando Pablo Lopez-Lezcano
|
c5199041bb
make the wall at the top of the conic section thicker so that the capsule holder ridges have a wider seat, we'll see how this prints as the sloped surfaces are tricky - even the existing conic section does not print very well and has to be refinished by hand
|
пре 10 година |
|
Fernando Pablo Lopez-Lezcano
|
1aec65e225
slight change in leg fit for tighter assembly, redo microphone stand mount as one piece that clips into standard microphone mount (will redo all the wiring for the test microphone)
|
пре 10 година |
|
Fernando Pablo Lopez-Lezcano
|
206ac01df0
slight change of radius and leg thickness for horizontal legs, 10mm capsule
|
пре 10 година |
|
Fernando Pablo Lopez-Lezcano
|
af46822dba
tweak radius for vertical legs, return vertical legs to previous size, make stand mount cap thicker so that the stalk has better grip, use mount and sleeve to create the right shaped hole in the stand cap
|
пре 10 година |
|
Fernando Pablo Lopez-Lezcano
|
5fa41a392f
created a mount that clips on a standard microphone stand mount (and a cap that connects with the amb microphone mount), includes cable slots so that the fully assembled cables can be threaded through, added more variables for different wall thickness for the mount and sleeve
|
пре 10 година |
|
Fernando Pablo Lopez-Lezcano
|
67cb5a3edf
almost done with the parametrization of the microphone mount, I modified the capsule code to be able to use it to automatically create the right indentations in the mount - I still need to get the depth of the capsule holder indentations to be parametric, ties loose ends and clean up a lot of code
|
пре 10 година |
|
Fernando Pablo Lopez-Lezcano
|
59f74d0c0e
slice open the mount body so that we can fit already wired microphone capsules into the array, and add a mount sleeve to close the gap in the body, it should mount by snapping on top of the body - with this we have a proper mount that fits all wires
|
пре 10 година |
|
Fernando Pablo Lopez-Lezcano
|
33631412b6
with a ridge_width of 2.0 the four wires just fit perfectly around the ridge, so it looks like this mount design is a go
|
пре 10 година |
|
Fernando Pablo Lopez-Lezcano
|
7c1e107b09
go back to the initial idea of just one slot for the mount to see if we can fit all four wires inside the mount, add rounded rests for better support
|
пре 10 година |
|
Fernando Pablo Lopez-Lezcano
|
be9f762d95
the previous mount design cannot house the microphone cables - they are very thin but not thin enough to fit, so I am trying several other designs in this commit, we will have to route the cables externally it seems, ugly...
|
пре 10 година |
|
Fernando Pablo Lopez-Lezcano
|
a33f148be4
another round of the mount design, the previous one could not be printed correctly (we do not want knife edges in the vertical direction)
|
пре 10 година |
|
Fernando Pablo Lopez-Lezcano
|
cbb6a2ad8a
rework a bit the mount of the tetrahedral microphone, more exact fit into the ridges, still needs some geometry work so that everything fits exactly together
|
пре 10 година |
|
Fernando Pablo Lopez-Lezcano
|
4adf66d81e
renamed first order microphone file to TinySphEAR.scad
|
пре 11 година |
