 Fernando Pablo Lopez-Lezcano
|
f87c86d4b8
add small ridge to capsule holders, make mount to stand right height (having problems printing the taller one), add experimental code for octathingy capsule connection legs when elevation of capsules is the right one
|
8 jaren geleden |
|
Fernando Pablo Lopez-Lezcano
|
fa83090c8e
render a tetrahedral capsule array with all capsules having three standard horizontal legs, they all interlock much better than before and the geometry of the array is almost perfect without having to visually look at it while glueing the capsules together
|
9 jaren geleden |
|
Fernando Pablo Lopez-Lezcano
|
50e11e194c
fix simple stand mount, the angles for the capsule indentations in the mount were wrong (at some point the convention changed and this was not fixed)
|
9 jaren geleden |
|
Fernando Pablo Lopez-Lezcano
|
b8eb2f8f92
some tolerance changes for better fit of the parts, fix shock mount eyelet, add hexagonal screw head insert to the stand mount eyelet so that the screw locks properly
|
10 jaren geleden |
|
Fernando Pablo Lopez-Lezcano
|
8f854699e0
add new shared include in TinySpHEAR EM182 and EM200 models
|
10 jaren geleden |
|
Fernando Pablo Lopez-Lezcano
|
98c5b937ae
start merging the Octathingy code into the current code base, move the capsule holder and some parameters into a separate file (SpHEAR_common), finally fix the code that calculates the depth of the slot that creates the interlocking fingers that hold the array together - turns out there are two cases delimited by the angle between adyacent capsules, the code now works for both the TinySpHEAR and the Octathingy arrays
|
10 jaren geleden |
|
Fernando Pablo Lopez-Lezcano
|
3f6a270667
really push changes to TinySpHEAR_common.scad, TinySpHEAR_mount_pcb.scad and TinySphEAR.scad
|
10 jaren geleden |
|
Fernando Pablo Lopez-Lezcano
|
7e9d9fa5b1
adjust the tolerance for the stand mount inner radius for a better fit
|
10 jaren geleden |
|
Fernando Pablo Lopez-Lezcano
|
ec823ec632
add ridge fit parameters to mount module
|
10 jaren geleden |
|
Fernando Pablo Lopez-Lezcano
|
e75115f167
render capsules with more facets, tune some fits for new printer, add one more parameter to capsule code to better fit the mount slots to the capsule array, actually fix the sign of the previous fit parameter (was making things smaller, not bigger), modify calls to do the right thing
|
10 jaren geleden |
|
Fernando Pablo Lopez-Lezcano
|
98d24b539d
add rfit parameter to the capsule module, this is needed so that carving the slots for the conical section of the mount works better; also adjusted the radius of the conical section of the mount so that it fits the capsule array - the code there is probably not correct and needs to be revised
|
10 jaren geleden |
|
Fernando Pablo Lopez-Lezcano
|
1e51bf2d99
added TinySpHEAR_common to hold all the modules and functions common to all the tetrahedral microphones
|
10 jaren geleden |
