 Fernando Pablo Lopez-Lezcano
|
f87c86d4b8
add small ridge to capsule holders, make mount to stand right height (having problems printing the taller one), add experimental code for octathingy capsule connection legs when elevation of capsules is the right one
|
8 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
9be86c043e
remove TinySpHEAR code (four capsule microphone) for old shock mount (internal ring, external ring and connecting rods), add ridges and channels to guide rubber bands in internal ring, connect internal ring columns with walls so they cannot bend, add parameters for new shock mount, redo rendering code for the different parts, update EM182 and EM200 versions of the microphone to render the new shock mount
|
9 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
c37ffbf9c5
add stop/support for shock mount to upper flare of tetra mic, first version of new external ring for shock mount
|
9 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
79e4376888
start design of new version of tetra mic shock mount based on the mount shock for the Octathingy
|
9 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
777beabdae
much better design for connector from microphone mount to microphone stand, add one version with threaded bottom in addition to the one for quik-release mount
|
9 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
4c27b20bd7
add code to capsule module to be able to render the modified array mount with a fully symmetrical array (all capsules with three standard horizontal legs)
|
9 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
f8d798b54b
redo all the geometry for the triangular top connecting legs, make sure it works for tetrahedral microphone and octathingy, add code to enable leg rendering only when it is physically possible to create the connection (avoid capsule holders that touch each other, and for higher capsule angle avoid leg fingers that touch the adyacent capsule), for triangular connecting legs use the lef_thick parameter to define the height of the legs - otherwise for eight or more capsule designs the slant of the leg limits the minimum radius of the array
|
9 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
8560803359
add new capsule holder connection legs, horizontal with slanted top and dual fingers with support, interlocks much better than the previous version but only works for small microphone array radius (no error checking at this point), this is now the default; add bottom flare to microphone body that can house a 12 pin connector, includes a side collar that locks the connector in place; add click locks for snapping the top and bottom flares to the body of the microphone; modify the capsule array mount to include four holes for the individual capsule cables so that there is no connection to the resonant cavity below; change defaults for the mount so that the bottom two capsules snap more securely into the mount
|
9 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
b1a1dbeb7a
SpHEAR_common: a couple of small changes to the shock mount internal rings
|
9 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
b8eb2f8f92
some tolerance changes for better fit of the parts, fix shock mount eyelet, add hexagonal screw head insert to the stand mount eyelet so that the screw locks properly
|
10 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
9468249d5e
properly join the flares with the mount stalks introducing mint_thin slices for the hulls, make the wall of the flare constant thickness, make stalk the same thickness as the flare, add an additional transition between flare and stalk, add transition in the lip to avoid overhangs while printing, replace top ellipsoid microphone array mount in TinySpHEAR with a rounded box which gives better cable clearance
|
10 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
47d8438cfd
remove ring_arm_gap as it is a global, reorder some parameters for clarity
|
10 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
80d3885a52
move eyelet of shock mount from TinySpHEAR and Octathingy to SpHEAR_common, rework rendering of full shock mount
|
10 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
43884ed6c0
move stand mount of shock mount from TinySpHEAR and Octathingy to SpHEAR_common
|
10 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
066c4aa3d8
move ring connectors of shock mount from TinySpHEAR and Octathingy to SpHEAR_common
|
10 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
7b08ce8c2e
move external ring of shock mount from TinySpHEAR and Octathingy to SpHEAR_common
|
10 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
46c54db512
move internal ring of shock mount from TinySpHEAR and Octathingy to SpHEAR_common
|
10 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
f4fd8cceda
move shared modules to SpHEAR_common, remove from TinySpHEAR and Octathingy mount_pcb files, change the names of some modules for readability
|
10 gadi atpakaļ |
|
Fernando Pablo Lopez-Lezcano
|
98c5b937ae
start merging the Octathingy code into the current code base, move the capsule holder and some parameters into a separate file (SpHEAR_common), finally fix the code that calculates the depth of the slot that creates the interlocking fingers that hold the array together - turns out there are two cases delimited by the angle between adyacent capsules, the code now works for both the TinySpHEAR and the Octathingy arrays
|
10 gadi atpakaļ |
