 Fernando Pablo Lopez-Lezcano
|
23208763ed
refactor flare code into one flare module and addition modules for connector, cable and capsule array stalk
|
9 lat temu |
|
Fernando Pablo Lopez-Lezcano
|
93f1b33b9d
change design of bottom connector housing to use only the core metal part of the connector, much simpler and easier to attach using the two screws included with the connector (that would normally attach the internal strain relief); remove unnecessary external connector lock collar; redesign snap joint so that arm is stronger - this is still not optimal
|
9 lat temu |
|
Fernando Pablo Lopez-Lezcano
|
8560803359
add new capsule holder connection legs, horizontal with slanted top and dual fingers with support, interlocks much better than the previous version but only works for small microphone array radius (no error checking at this point), this is now the default; add bottom flare to microphone body that can house a 12 pin connector, includes a side collar that locks the connector in place; add click locks for snapping the top and bottom flares to the body of the microphone; modify the capsule array mount to include four holes for the individual capsule cables so that there is no connection to the resonant cavity below; change defaults for the mount so that the bottom two capsules snap more securely into the mount
|
9 lat temu |
|
Fernando Pablo Lopez-Lezcano
|
b8eb2f8f92
some tolerance changes for better fit of the parts, fix shock mount eyelet, add hexagonal screw head insert to the stand mount eyelet so that the screw locks properly
|
10 lat temu |
|
Fernando Pablo Lopez-Lezcano
|
89226e2fec
make corners of body more rounded
|
10 lat temu |
|
Fernando Pablo Lopez-Lezcano
|
88df995d33
re-add side slices of the top of the mount for better cable management, change to proper dimensional parameters so that it works for both 10 and 14mm capsule diameters
|
10 lat temu |
|
Fernando Pablo Lopez-Lezcano
|
5fccdc9de7
shave top of mount slots to get rid of problematic ridge, also add - disabled for now, just testing this - slicing of the top sides of the mount
|
10 lat temu |
|
Fernando Pablo Lopez-Lezcano
|
c746cf4c8c
add better mounting slot in the microphone mount for the four capsule array to fit it, this is much more solid than before although not perfect
|
10 lat temu |
|
Fernando Pablo Lopez-Lezcano
|
bb36093ef1
fix radius of upper capsule array mount to have enough space for the wires
|
10 lat temu |
|
Fernando Pablo Lopez-Lezcano
|
604984fbd6
in TinySpHEAR go back to 1mm walls, 2 * that creates trouble printing, the material gets too hot because of the printing pattern and the shape is rough and bumpy, also remove the intermediate flare - we do not really need that for now
|
10 lat temu |
|
Fernando Pablo Lopez-Lezcano
|
9468249d5e
properly join the flares with the mount stalks introducing mint_thin slices for the hulls, make the wall of the flare constant thickness, make stalk the same thickness as the flare, add an additional transition between flare and stalk, add transition in the lip to avoid overhangs while printing, replace top ellipsoid microphone array mount in TinySpHEAR with a rounded box which gives better cable clearance
|
10 lat temu |
|
Fernando Pablo Lopez-Lezcano
|
47d8438cfd
remove ring_arm_gap as it is a global, reorder some parameters for clarity
|
10 lat temu |
|
Fernando Pablo Lopez-Lezcano
|
80d3885a52
move eyelet of shock mount from TinySpHEAR and Octathingy to SpHEAR_common, rework rendering of full shock mount
|
10 lat temu |
|
Fernando Pablo Lopez-Lezcano
|
43884ed6c0
move stand mount of shock mount from TinySpHEAR and Octathingy to SpHEAR_common
|
10 lat temu |
|
Fernando Pablo Lopez-Lezcano
|
066c4aa3d8
move ring connectors of shock mount from TinySpHEAR and Octathingy to SpHEAR_common
|
10 lat temu |
|
Fernando Pablo Lopez-Lezcano
|
7b08ce8c2e
move external ring of shock mount from TinySpHEAR and Octathingy to SpHEAR_common
|
10 lat temu |
|
Fernando Pablo Lopez-Lezcano
|
46c54db512
move internal ring of shock mount from TinySpHEAR and Octathingy to SpHEAR_common
|
10 lat temu |
|
Fernando Pablo Lopez-Lezcano
|
f4fd8cceda
move shared modules to SpHEAR_common, remove from TinySpHEAR and Octathingy mount_pcb files, change the names of some modules for readability
|
10 lat temu |
|
Fernando Pablo Lopez-Lezcano
|
2b2cbfbbd5
a couple of tweaks for better fit after printed
|
10 lat temu |
|
Fernando Pablo Lopez-Lezcano
|
85ad463b8c
tweak some tolerances for altest test print, calculate mount corner automatically
|
10 lat temu |
|
Fernando Pablo Lopez-Lezcano
|
ecfb059220
change pcb dimensions and tolerances, adjust parameters for ccrma logo
|
10 lat temu |
|
Fernando Pablo Lopez-Lezcano
|
6e48003c29
change length and width of pcb to match new design, parametrize several hard coded numbers, add space in front of and behind the printed circuit board, make main body more rounded, remove old version of main body, add dot in the microphone stalk marking the back of the microphone, add CCRMA logo to microphone body
|
10 lat temu |
|
Fernando Pablo Lopez-Lezcano
|
3f6a270667
really push changes to TinySpHEAR_common.scad, TinySpHEAR_mount_pcb.scad and TinySphEAR.scad
|
10 lat temu |
|
Fernando Pablo Lopez-Lezcano
|
38f7c51b4c
add proper fit to radius of top conic section
|
10 lat temu |
|
Fernando Pablo Lopez-Lezcano
|
92a7090ff8
another design for the outer ring of the shock mount
|
10 lat temu |
|
Fernando Pablo Lopez-Lezcano
|
87283f487e
add mount hub for shock mount
|
10 lat temu |
|
Fernando Pablo Lopez-Lezcano
|
c243c595ca
more improvements to inner rings of shock mount - add rounded corners in rubber band slots, make connecting bars fit with slots, add triangular fillet around bar holes
|
10 lat temu |
|
Fernando Pablo Lopez-Lezcano
|
519d7fd4f8
new version of body with just one slot at the bottom to make space for shielding the printed circuit boards; more work on the shock mount for the microphone assembly
|
10 lat temu |
|
Fernando Pablo Lopez-Lezcano
|
e2c2a4ffd4
fix the rounded corners of all boxes so that the wall is constant thickness, create another function for the support ring of the shock mount, calculate radius of support ring based on the approximate angle of the elastic bands and the separation between the body rings
|
10 lat temu |
|
Fernando Pablo Lopez-Lezcano
|
6f79316ce3
start work on a shock mount for the whole microphone assembly (the microphone sits on the shock mount)
|
10 lat temu |
