|
calibration
|
239babb486
ready to test print gimbal test, need to add microphone clip
|
10 yıl önce |
|
BigSpHEAR.scad
|
80c64a6157
add initial 12 capsule design to repository
|
11 yıl önce |
|
BigSpHEAR_20.scad
|
3f64d66464
the leg slots have now the correct depth, it does fix the big sphere build process, also separate more the individual pieces for the print otherwise some of the connecting legs get messed up
|
11 yıl önce |
|
Octathingy.scad
|
fc9b089471
fixed part labels for printing
|
11 yıl önce |
|
README.md
|
b33de3d705
add initial empty README
|
11 yıl önce |
|
TestRig.scad
|
a88b11704f
initial design of a printable test rig based on the microphone stand mount, it is all flat printable and includes a lever to rotate the capsule holder and a detente that stops rotation at 0 and 90 degrees (cleverly done, I think) - tolerances will have to be added after test prints
|
10 yıl önce |
|
TinySphEAR.scad
|
c5199041bb
make the wall at the top of the conic section thicker so that the capsule holder ridges have a wider seat, we'll see how this prints as the sloped surfaces are tricky - even the existing conic section does not print very well and has to be refinished by hand
|
10 yıl önce |
Fernando Pablo Lopez-Lezcano
c5199041bb
make the wall at the top of the conic section thicker so that the capsule holder ridges have a wider seat, we'll see how this prints as the sloped surfaces are tricky - even the existing conic section does not print very well and has to be refinished by hand